Latest insights
Diagnose color differences between wide-format printers by aligning media, print modes, calibration, profiling, RIP settings and verification targets.
Read article
Banding can come from nozzles, media advance, alignment, ink limits, drying, media handling or the source file. Use the pattern to test causes in...
Read article
The shape of a contour-cut error can separate calibration, crop-mark, media-feed, skew, lamination and blade problems. Diagnose the pattern before changing offsets.
Read article
Scratch resistance depends on ink cure, surface protection, handling, cleaning and real service exposure. Diagnose when damage occurs before selecting a remedy.
Read article
Plastic is not one substrate. Surface energy, mold release, plasticizer migration, texture and outgassing can prevent vinyl adhesion even when the surface looks clean.
Read article
Wrinkles, tunnels and lifted laminate edges have different mechanisms. Use the defect pattern to separate alignment, tension, winding, compatibility and storage problems.
Read article
Silvering is microscopic air between overlaminate adhesive and the printed surface. Diagnose pattern, print texture, pressure, temperature and compatibility before changing settings.
Read article
Bubbles, shrinkage, and edge lift are symptoms. Diagnose contamination, trapped air, film stress, solvent, heat, geometry, pressure, and laminate compatibility before blaming the roll.
Read article